Par default :
login: user
pass: user
Liste des commandes dispo :
exit, help, home, ls, clear, build (?), TAB (?), telnet, ping, ftp, tftp, .., pwd, ps (marche pas).
Et aussi : dans /home :
| Code: |
O <CMD> reboot
O <CMD> date
O <CMD> version
O <CMD> show
O <CMD> install
O <CMD> chgconf
O <LIST> ipqos
----O <CMD> policy
----O <CMD> nat
----O <CMD> nataction
----O <CMD> spoof
----O <CMD> listwt
----O <CMD> listwfq
----O <CMD> qstat
----O <CMD> listtc
----O <CMD> tcstat
----O <CMD> firewall
----O <CMD> attack
O <CMD> list
O <CMD> stats
O <CMD> ifconfig
O <CMD> route
O <CMD> bitmap
O <CMD> save
O <CMD> erase
O <CMD> rndis
O <LIST> rarpd
----O <CMD> add
----O <CMD> list
----O <CMD> rarpd
----O <CMD> delete
O <LIST> arp
----O <CMD> list
----O <CMD> delete
----O <CMD> flush
O <CMD> dhcp
O <LIST> sntp
----O <CMD> sntp
----O <CMD> timezone_set
----O <CMD> timezone_help
----O <CMD> timezone_disp
O <LIST> dhcpserver
----O <CMD> start
----O <CMD> stop
----O <CMD> subnet
----O <CMD> host
----O <CMD> lease
O <CMD> dhcpr
O <LIST> dns
----O <CMD> list
----O <CMD> help
----O <CMD> set
----O <CMD> delete
----O <CMD> dnsr
----O <CMD> trace
O <LIST> wlan
----O <CMD> wl
----O <CMD> mode
----O <CMD> radio
----O <CMD> ssid
----O <CMD> channel
----O <CMD> apname
----O <CMD> status
----O <CMD> statistics
----O <CMD> restdef
----O <CMD> fragthresh
----O <CMD> rtsthresh
----O <CMD> beacint
----O <CMD> rate
----O <CMD> dtim
----O <CMD> preamble
----O <CMD> authentication
----O <CMD> wepmode
----O <CMD> defwepkey
----O <CMD> wepkey64_1
----O <CMD> wepkey64_2
----O <CMD> wepkey64_3
----O <CMD> wepkey64_4
----O <CMD> wepkey128_1
----O <CMD> wepkey128_2
----O <CMD> wepkey128_3
----O <CMD> wepkey128_4
----O <CMD> assocclients
----O <CMD> macfiltering
----O <CMD> macaccesstype
----O <CMD> addstation
----O <CMD> delstation
----O <CMD> accesslist
----O <CMD> flushlist
----O <LIST> wpa
O <LIST> relayvoice
----O <CMD> trace
----O <CMD> icall
----O <CMD> status
----O <CMD> force
O <LIST> pstnclass
----O <CMD> info
----O <CMD> trace
----O <CMD> pstn
----O <CMD> icall
----O <CMD> localcode
----O <CMD> set
----O <CMD> clear
----O <CMD> default
----O <CMD> list
----O <CMD> test
O <LIST> adn
----O <CMD> trace
----O <CMD> info
----O <CMD> tid
----O <CMD> tidval
O <LIST> sup
----O <CMD> trace
----O <CMD> reboot
----O <CMD> info
----O <CMD> cpt
----O <CMD> setsup
----O <CMD> timer
----O <CMD> memory
----O <CMD> task
O <LIST> mgcp
----O <CMD> listpp
----O <CMD> voipstatus
----O <LIST> voice
--------O <CMD> portdiag
--------O <CMD> dspdownload
--------O <CMD> DetectTone
--------O <CMD> DSPConnect
--------O <CMD> DSPQuit
--------O <CMD> Dtmfenable
--------O <CMD> TestTone
--------O <CMD> QuitTone
--------O <CMD> ecparams
--------O <CMD> 1si3216
--------O <CMD> 3si3216
O <LIST> vlan
----O <CMD> enable8021q
----O <CMD> disable8021q
----O <CMD> delete8021q
----O <CMD> create
----O <CMD> delete
----O <CMD> enable
----O <CMD> disable
----O <CMD> listvlan
----O <CMD> portconfig
----O <CMD> listport
----O <CMD> qosmapping
----O <LIST> classify
--------O <CMD> add
--------O <CMD> delete
--------O <CMD> deleteall
--------O <CMD> list
----O <LIST> egress
--------O <CMD> addport
--------O <CMD> deleteport
--------O <CMD> list
O <LIST> acf
----O <CMD> trace
----O <CMD> media
----O <CMD> intf
----O <CMD> server
----O <CMD> setmacs
----O <CMD> loadint
O <CMD> aread
O <CMD> awrite
O <CMD> apregdump
|
Accueil 
FAQ 
Rechercher 
S'enregistrer 
Membres 
Groupes 
Connexion 
Sujet: CLI - Liste des commandes en user 
Ven 13 Mai à 20:29
) Mais bon surement 10% des capacités de la CBox, pas possible par ex, de configurer le 2 eme port téléphonique pour un autre provider VOIP eg. Wengo, pas possible de la passer en bridge, mettre un mot de passe pour la configuration....
